plumbing issue/help

[thirty6]

So, plumbing a new system is always a challenge. mainly because the way it lays out on paper I somehow jack up with the application. new to me cube is filled and i now have what appears to be slight seeping from something underneath of course when i test ran plumbing it was good, so i EFFED something up

I have that wooshing, gurgling sound from overflow if I knew what it was referred to I would simply look it up, but i dont so any help is appreciated:

the water section in overflow will rise, gurgle and drop down again not the end of the world but could be better

thoughts?

 

[diana a]

can you take a video and post?

 

[thirty6]

can you take a video and post?

 

[thirty6]

16 sec. saying too large a video

 

[Goodair]

Post on YouTube, then link on here.

 

[thirty6]

Mm

Post on YouTube, then link on here.

mmm night have to have the teenagers do that for me!

 

[thirty6]

Maybe this will work, not sure

 

[iTzJu]

drill a hole on the top of the 90, air is being trapped which is causing that toile bowl effect.

want something like this:

 

[thirty6]

Thanks, I will make the one that’s on top bigger or maybe it could be clogged up.

 

[Foxchase]

I second what iTzJu said. A tiny hole on top of the 90 should fix the issue

 

[Sponge]

Plus if you add a valve you can dial it in perfect

 

[iTzJu]

Plus if you add a valve you can dial it in perfect

i wouldnt add a valve on a durso drain, unless there is an emergency drain as well.

 

[Sponge]

Really. Air valves are fairly common on them. But I do understand what you are saying

 

[iTzJu]

Really. Air valves are fairly common on them. But I do understand what you are saying

ohh misunderstood. thought a valve on the drain itself not the air line.

 

[Sponge]

Gotcha. Totally get it. Thanks for the input