Search results

Another great article by Dr. Randy.....by the way, he uses Instant Ocean....one of the main reasons I had little reluctance switching over to IO as well. I had this same issue when I was using Reef Crystals. They supposedly changed the recipe a couple years ago that slightly improved the...

I've got way too much of this. Come and get it. Especially Purple and Red (Orange). Fresh cut. I'm in Sayreville.

Mike, it's chiton you're thinking of. I thought that was a possibility, but do they come this small? I've only seen chiton that were considerably larger.

I’ve looked at my three hitchhiker sites and can’t find this little creature. I’ve only found them on the sides or bottoms of frag plugs that have been in the sand. Most are about 1/8 inch long…found one about 3/16 inches. Here are two of the little buggers on the side of a frag plug.

I know I'm late replying to this post, but if you still have it, I'll come look at your tank.....I mean pick up the pipe. :eagerness:

Nice clean look Dan. When I was acclimating my corals and simply had the lights hanging without a cover, the light fall off in front of the tank was blinding. Do you have a similar problem.....or do the lens direct most light down?

Happy Birthday Bob! Have a great day.Dance

Right from Liveaquaria Minimum tank requirements and Aggressiveness Yellow Tang 100 G - Aggressive towards other Zebrasoma Achilles Tang 180 G - aggressive towards other Tangs and Surgeonfish Blonde Naso Tang 180 G - aggressive towards other tangs whitecheek tang 125 G –...

What tangs are we talking about. One Sailfin is too much for a 150.

You will want to cure that rock in saltwater....usually takes a month or so. HERE's one write-up on how to do it.

Chris, don't know if you've ever seen this...and you didn't mention the type of clam....but this video might help you. Why Do Clams Die in Aquariums

It's yours.

This came with the JBJ 28 and I'm not using it. My understanding is that this works very well if you use a high volume air pump. You are not going to do anything with a 10 dollar Walmart special pump.....need a big boy. Pick-up in Sayreville.

:worthless

Kevin, with me, this is a valid question. I've had my Homer "Duh" moments. The source of resin is separated and recharged. It is the same source I've been using for some time. Each time I've had to change my mixed bed, I've gone and tried the separate bed (using the same resin). When...

Yes, it's the slim coat that is protecting these fish over the others. It is my understanding that stress impacts slim coat....some fish more then others.

When I was typing the OP, I came to the part about the IN and OUT of the two canisters and thought, “What the hoot, let me flip them back around and see what that does.” I wasn’t overly optimistic, but maybe these RO folks know something I don’t know. By the way, the IN side allows water to...

Thanks Kevin....it's posted over there as well.

I'm a chemist and have used exchange resins multiple times...and have a patent on use of one for radioactive stuff. So I think I know how they work. They are simple "exchange" resins. The bad stuff is attracted to the respective resin and, in the process either kicks out a hydrogen or...

Good point. The first two times I attempted this, I did not take note of the order of the two canisters. In discussing this at a meeting where David (Malulu) was there (he has a Kati/Ani unit....a bigger version of what I'm trying to do), he stated the it was called "Kati/Ani, so Kati...