2 sets for sale - $150
Hillsborough - Jeff @ 908-507-5380
Used Marine Magic Algae Scrubbers - MM-ALGAE-01 - with controller of timer and water pump
Introduction
Algae Skimmer is a water filtration device which uses light to grow algae. In this process, undesirable chemicals are removed from the water. Algae is growing by the Red and Blue light, and algae will remove toxic substance like NH4, NO3 and etc… in your salty aquarium tank.
Marine Magic Algae Filtration device is a Tank-mounted design. We use 12 pcs 1W high power Blue and Red LED light to facilitate the growth of algae. With 12 pcs high Wattage 1W LED, the algae could grow extra well.
Product Features:
1. This is a tank-mounted design , simple to use by mounting on the back of your aquarium tank.
2. With 12 pcs 1 watts high power LED to simulate the Red and Blue wavelength which are favourable for algae growth. (11 pcs RED LED at 660 nm and 1 pcs of BLUE LED at 450nm)
3. Nylon rough texture mesh. Removable design, very easy to use and clean.
4. Separate LED module design. With extra large aluminium heat sink to dissipate heating.
5. A water pump to diverting the water into the device.
6. With timer to control the LED module on/off. Simple to use. (see picture)
7. Water - pump included to divert the salty tank water into this device.
Product specification
Product dimension:
Case: 155 x 63 x 135 mm (L x W x H)
Filter: 140 x 115 mm (W x H)
LED module: 125 x 115 mm (W x H)
Power supply:
Input Power supply: AC 110-265V , 50 / 60 Hz, 1A
Output Power supply: DC 14-28V, 300mA ± 5%
Water Pump. 12VDC, 0.4A , 3W.
Filter:
1 side growth area with nylon mesh texture. The mesh area is 12 sq. inches.
LED module
12 pcs x 1 W. 11 pcs Red at 660 nm and 1 pcs Blue at 450nm.
Item including
1 x Main unit with Tank Lid
1 x 12W LED blue and red module with heat sink (12 pcs x 1W)
1 x Adaptor
1 x Replaceable algae growing filter
1 x water pump with 1 meter silicon tube
1 x controller. Time set for the LED on/off in a daily basis
Hillsborough - Jeff @ 908-507-5380
Used Marine Magic Algae Scrubbers - MM-ALGAE-01 - with controller of timer and water pump
Introduction
Algae Skimmer is a water filtration device which uses light to grow algae. In this process, undesirable chemicals are removed from the water. Algae is growing by the Red and Blue light, and algae will remove toxic substance like NH4, NO3 and etc… in your salty aquarium tank.
Marine Magic Algae Filtration device is a Tank-mounted design. We use 12 pcs 1W high power Blue and Red LED light to facilitate the growth of algae. With 12 pcs high Wattage 1W LED, the algae could grow extra well.
Product Features:
1. This is a tank-mounted design , simple to use by mounting on the back of your aquarium tank.
2. With 12 pcs 1 watts high power LED to simulate the Red and Blue wavelength which are favourable for algae growth. (11 pcs RED LED at 660 nm and 1 pcs of BLUE LED at 450nm)
3. Nylon rough texture mesh. Removable design, very easy to use and clean.
4. Separate LED module design. With extra large aluminium heat sink to dissipate heating.
5. A water pump to diverting the water into the device.
6. With timer to control the LED module on/off. Simple to use. (see picture)
7. Water - pump included to divert the salty tank water into this device.
Product specification
Product dimension:
Case: 155 x 63 x 135 mm (L x W x H)
Filter: 140 x 115 mm (W x H)
LED module: 125 x 115 mm (W x H)
Power supply:
Input Power supply: AC 110-265V , 50 / 60 Hz, 1A
Output Power supply: DC 14-28V, 300mA ± 5%
Water Pump. 12VDC, 0.4A , 3W.
Filter:
1 side growth area with nylon mesh texture. The mesh area is 12 sq. inches.
LED module
12 pcs x 1 W. 11 pcs Red at 660 nm and 1 pcs Blue at 450nm.
Item including
1 x Main unit with Tank Lid
1 x 12W LED blue and red module with heat sink (12 pcs x 1W)
1 x Adaptor
1 x Replaceable algae growing filter
1 x water pump with 1 meter silicon tube
1 x controller. Time set for the LED on/off in a daily basis
Attachments
Last edited:
