• Folks, if you've recently upgraded or renewed your annual club membership but it's still not active, please reach out to the BOD or a moderator. The PayPal system has a slight bug which it doesn't allow it to activate the account on it's own.

Help with Pixelation

I read, re read and read again, it seems the more I read the more confused I get, That one page you sent me awhile ago had some settings, I set the camera to the same and the pic's were all distorted, since then I've been pushing buttons, turning dials, and can seem to get a crisp picture. I just reset to factory setting and took a couple of pics, I didn't do anything to them just uploaded to photobucket.

TV Mode
IMG_0491.jpg


AV mode
IMG_0492.jpg


TV mode
IMG_0494.jpg


TV mode
IMG_0495.jpg


TV mode
IMG_0498.jpg


Av mode
IMG_0496.jpg


Av mode
IMG_0499.jpg
 

Brian

Officer Emeritus
Officer Emeritus
Yeah, manual mode is the best mode by far for fish pics. It looks as though you are shaking a bit when you take the pics. Are you holding the lens right against the glass?

There is also a little dial right next to the viewfinder (eyepiece?) That is a fine tuning adjustment. But if that is set to the max setting one way or the other the camera will never focus properly. Maybe you can try playing with that?
 
I'm using a tripod, here is some pic's in full auto, the problem here is I can't turn the flash off, I put my hand over the flash to block it.

IMG_0512.jpg


IMG_0510.jpg


IMG_0511.jpg


IMG_0509.jpg


IMG_0508.jpg
 
thanks, but they were taken in full auto mode, WB was auto also. What should I set the WB to?


Here is some in ma mode, the dark pick is no fixing and the second is with using quick fix.

IMG_0520.jpg

IMG_05202.jpg


IMG_0522.jpg

IMG_05222.jpg
 

Brian

Officer Emeritus
Officer Emeritus
You can use Custom WB, take a picture of something white in the tank (sand, piece of PVC) and use that picture to set the white balance.
 
Please post what are your speed and aperture when getting those pictures. What type of camera do you use?

While tripod is really a must when taking such photos, don't underestimate the vibrations that happen from mere pressing the button, specially with a flimsy tripod.

Most of the blurs on your pics, that I have seen, are probably caused by overexposure, and few of them have very narrow depth of field. Many of the shots have very bad light quality, so I advise you to check the histogram.

When taking slow shots (longer then 1/200), as you seem to be, it helps a lotif you turn off your water movement.

Are you using autofocus? Try focusing manually, with several shots of the same area with slightly changed distances, so that you cover the optimal range. Very few cameras these days have really good manual focuser, and autofocus should be avodied by all means as a primary focusre and used only as checking mechanism.

If you are using any of the more advanced digital cameras, what did you set your ISO to? Set it to 800 at very least. There is also an issue wether your lighting spectrum is optiml for that particular camera's sensor. Remeber, they make cameras to repond to mostly different spectrum of lights that we use for our tanks.
 
Thanks Jack,
I still have a lot to figure out, I took them in Man mode but with auto focus, I can't seem to figure out how to play with the speeds and all the other settings. When I start to change settings I can never get a good shot and wind up having to reset the camera. It's just too confusing for me.
 
Top