Looking for a dimmable/controllable LED light for my NUVO 30L, the tank is 36" long so I'd be open too 2 smaller lights instead of 1 large one.
It needs be be controllable either via a internal controller or by my Reefkeeper ALC.
I'd love to pick up a maxspec Razor but my budget just isn't their for it, I'm looking to spend no more than 300.00.
I do have things for trade:
-Used Aquaticlife 115 skimmer
- PAR38 with clamp---- Has 12X 1.2W LEDs: 4 - 10,000K white, 4 - 14,000K white, 4 - 453 nm Actinic Blue
- BoostLED PAR38 (3 Royal Blue, 1 Cool White, 1 Natural White) with clamp
- Custom 24 3w dimmable LED setup that can be mounted into most any AIO hood.
Here are the details
8 CREE XP-E R3 Cool White 3W LED On Star
16 CREE XP-E Royal Blue 3W LED On Star
They are driven by a Nanocustoms Duo 700 LED Driver. This has 2 700ma drivers that are on sliders and 3way rocker switch but also has a 0-10v input. I was running mine with the reefkeeper for the dusk dawn effect but not necessary. The unit is fully dimmable.
The LEDs are all on a Nanocustom heatsink and attached with BJB Solderless LED Connectors on Quadica
thermal heat tape.
This will mount in BC29/14, NC28/24/12, AP24/12 or stand alone"
It needs be be controllable either via a internal controller or by my Reefkeeper ALC.
I'd love to pick up a maxspec Razor but my budget just isn't their for it, I'm looking to spend no more than 300.00.
I do have things for trade:
-Used Aquaticlife 115 skimmer
- PAR38 with clamp---- Has 12X 1.2W LEDs: 4 - 10,000K white, 4 - 14,000K white, 4 - 453 nm Actinic Blue
- BoostLED PAR38 (3 Royal Blue, 1 Cool White, 1 Natural White) with clamp
- Custom 24 3w dimmable LED setup that can be mounted into most any AIO hood.
Here are the details
8 CREE XP-E R3 Cool White 3W LED On Star
16 CREE XP-E Royal Blue 3W LED On Star
They are driven by a Nanocustoms Duo 700 LED Driver. This has 2 700ma drivers that are on sliders and 3way rocker switch but also has a 0-10v input. I was running mine with the reefkeeper for the dusk dawn effect but not necessary. The unit is fully dimmable.
The LEDs are all on a Nanocustom heatsink and attached with BJB Solderless LED Connectors on Quadica
thermal heat tape.
This will mount in BC29/14, NC28/24/12, AP24/12 or stand alone"